AG22B PARKING SENSOR BUZZER

Offer's description

A parking sensor is a device that assists parking and reversing a car. It works on the principle of sonar – it emits ultrasonic waves, which, after reflection from an obstacle, allow you to determine the distance between the car and the obstacle. When reversing, the device correctly detects obstacles in the vehicle's path and warns the driver. The sensor is equipped with a special buzzer that emits a sound signal that increases the frequency of the sound as an obstacle approaches! Product Features:Brand new, high quality 4 point reversing/parking sensor with buzzer. When the reversing lights are on, power is supplied to the device. When the power is switched on, it is indicated by a short beep, then the device enters the AUTO-CHECK state (automatic control mode of the device's circuits). The parking sensor is equipped with a special sound signal (buzzer)The device works correctly if the reversing car is moving at a speed below 5 km/h. Ultrasonic sensors should not be dirty. Mud, dust, etc. may cause it to malfunction. In order to mount the device correctly, it is necessary to:Mark the mounting locations of the sensors. Install the sensors into the holes made with the drill bit provided. The ultrasonic sensors should be positioned so that they fit snugly against the surface of the bumper and their axis is parallel to the road surface. Ultrasonic sensors should be placed in such a way that no other parts of the vehicle are in their field of vision. Connect the power cords. Connect the previously installed display to the control unit. Do not connect the sensors yet. Engage reverse with due caution (if this requires switching on the ignition or starting the engine to turn on the power to the machine). If the device is properly connected, it will emit a short beep. Connect one of the sensors to the control unit and set the obstacle at a distance of 1m from the sensor. The buzzer will transmit the right signal. In this way, the rest of the sensors should be checked. Once the test is complete, connect all sensors to the control unit. Technical specifications:Supply voltage: DC12 V (10.5V - 16V)Supply current: 40mA~300mSensor range: 0.3~2.0 mVertical detection: 90 cmHorizontal detection: 90 cmMaximum power consumption: 4WSound sound measurement (dedicated buzzers)Obstacle distance measurementObstacle location Operating temperature(°C) -40~+80Power cord length: 70 cmSensor cable length: 2.4 mSensor color: blackThe set includes:Central control unit4 sensors ultrasonicBuzzer - sound signalling devicePower connection cableSpecial drill bit for drilling holes in the bumper for sensors (22 mm hole saw)Double-sided adhesive mounting padUser manualWelcome to place an order!